Mobile Drainage Pump Truck
Choose pump flow at the total dynamic head your drainage job requires. Account for solids, intake conditions, the hose route and discharge point, as well as runtime and maintenance access.
- Drainage Capacity
- 1000–4000 m³/h
- Body Material
- Cold-rolled steel sheet
- Drainage Pump Configuration
- 2–8 × 500 m³/h submersible or 1–2 × 2,000 m³/h centrifugal
Front three-quarter view of a drainage truck with a white cab, yellow equipment body and closed side shutters (1 of 6)Technical specifications
| Item | Value |
|---|---|
| Body and layout | |
| Body Material | Cold-rolled steel sheet |
| Equipment and published ratings | |
| Drainage Capacity | 1000–4000 m³/h |
| Drainage Pump Configuration | 2–8 × 500 m³/h submersible or 1–2 × 2,000 m³/h centrifugal |
| Generator Power | 65–450 kW |
| Pump Type | Submersible Pump / Centrifugal Pump |
| Water Hose Length | 8 m |
Published configuration range · Data sheet v1.1 · Source checked · Supporting documents
Pumps, hoses and discharge route
Typical work
- Urban floodwater removal
- Storm-site dewatering
- Remote pumping operations
Configuration details
- Delivered flow at total dynamic head
- Solids, sediment and contamination
- Hose route and discharge point
- Runtime, guarding and maintenance
- Hydraulic duty
- State flow at total dynamic head, intake, solids, hose route and outfall.
- Power and runtime
- List connected loads, starting sequence, runtime, cable route and protection.
- Field service
- Define repairs, crew, tools, consumables, storage and service interval.
Acceptance requirements
- Reconcile installed equipment, rated interfaces, cables, hoses, controls and loose items to the approved schedule.
- Witness the specified duty point or load schedule with identified instruments and retained results.
- Record completed-vehicle mass, axle loads, drawings, manuals, safeguards and exceptions.
Build and inspection
Final dimensions, installed equipment, route suitability and acceptance records are confirmed for the selected project.
Selecting the drainage package
What flow will reach the discharge point?
Delivered flow depends on head and hose losses as well as intake conditions. Describe the water and intake, then the hose route and receiving point, alongside the target flow. Free-flow output does not establish performance through that route.
Are all the listed pumps included?
The listed alternatives describe different configurations. Confirm the selected pump inventory and which pumps will run together; do not add alternative capacities or assume every option is included in the quotation.
Does a demonstration cover a different hose route?
The result applies to the recorded test conditions. A different route or outfall needs its own duty assessment.
How is the drainage package prepared for transport?
Identify the installed pumps and hose reels, with separately packed hoses and fittings in the inventory. Agree generator and fuel-system preparation with the supplier and carrier.
Specify your Mobile Drainage Pump Truck
Share the operating duty, destination and equipment requirements.