Recovery Vehicle Load-Case Worksheet
Document casualty, geometry, ground, restraint and recovery-equipment assumptions for an engineering review of the selected vehicle load case.
Review contacts: Frank Pan and Mia Fu.
| Case ID | Operation | Casualty mass | Lift / pull geometry | Ground / gradient | Selected equipment | Rating evidence | Decision |
|---|---|---|---|---|---|---|---|
How to use this tool
Use separate rows for each lift, pull, tow or transport case and attach the selected equipment rating basis.
- Describe the casualty mass and condition.
- Record geometry, gradients, surface and anchoring assumptions.
- Require supplier confirmation against the selected model documentation.
Keep a record of your inputs
Add the project ID, responsible person, date and revision before using the worksheet to compare suppliers or make a technical decision. Record where each input came from. Leave unknown values open for confirmation; do not fill a gap with an assumed catalogue figure.
The result helps with calculation or recordkeeping only. A competent reviewer must check the units and operating conditions against the selected equipment documents. That review must also cover destination requirements, interactions between systems and the evidence needed at acceptance.
Assumptions and limits
- This worksheet does not calculate a safe recovery rating.
- A competent recovery and engineering review is required.